Manufacturing plant · Jiangmen, CN
English · GlobalRequest a quoteStore

Industries and duty profiles

Ten industries. Four duty profiles.

A drive is not chosen by the industry it stands in — it is chosen by the load it turns and the room it lives in. This page takes the ten industries we quote most and states, for each one, what the load is, which frame rule it triggers, and which platform carries it.

01The load sizes the frame

Industry names do not appear in the sizing calculation.

Variable-torque duties take a frame at motor rating because torque falls with the square of speed; constant-torque duties go one frame up when the start is loaded. That rule is the same in a pumping station and in a cement line.

02The room sizes the build

IP20 is the standard. Everything beyond it is a drawing.

Cabinet builds, filters and coatings are quoted against the enclosure, the cooling path and the room the drive stands in — which is why this site publishes the standard grade and not a per-industry protection table.

03The volume sizes the programme

One sample, then your parameter file.

A single unit goes out at sample price for your own bench. From 100 pieces the build carries your print, your nameplate and your parameter set loaded at the factory before the unit ships.

01 · 4 industries

Process and utility

Duties where the process fluid sets the load: pumps and fans on a long, mostly unattended run, sized on the curve rather than on the motor plate.

Agriculture and irrigation

Submersible or surface pump running off a solar array or a weak rural grid.

Rated on the pump curve at the duty point; MPPT, dry-run and sleep thresholds set to site head.

G580MPV-G · 0.4–900 kW

How this duty is driven

Water treatment

Transfer and dosing pumps, multi-pump staging, long unattended runs.

Frame at motor rating on variable torque; PID pressure loop and staging handled in the drive.

G500-G/P · 0.75–900 kW

How this duty is driven

HVAC and building services

Supply and return fans, chilled-water pumps and AHU coils on a building schedule.

Frame at motor rating on fans; carrier 0.5–16 kHz for low acoustic noise in occupied space.

G500-G/P · 0.75–900 kW

How this duty is driven

Food and beverage

Conveyors, mixers and CIP pumps in a washdown area, changed over between batches.

One frame up on loaded starts; the enclosure build is quoted per area, not published as a rating.

G500 / G600 · 0.75–900 kW

Send the duty point
Municipal and process pumping duty served by a Goldbell vector drive

Pumping · PID pressure loop, multi-pump staging, soft-start ramp

02 · 3 industries

Heavy and continuous

Duties where the drive runs for weeks at a time and the start is the hard part: loaded conveyors, fans that never stop, equipment nobody can walk up to.

Mining and metals

Crusher feeds, heavy conveyors and slurry pumps that start against a loaded belt.

One frame up on constant torque; the 150% for 60 s G rating is what carries the start.

G600 / G500 · 0.75–900 kW

Read the full industry page

Cement and aggregates

Kiln and mill fans, apron feeders, runs measured in weeks rather than shifts.

One frame up on constant torque; a cabinet build is quoted for a dust-loaded room.

G600 · 0.75–900 kW

Send the duty point

Oil, gas and chemical

Process pumps and blowers inside a cabinet or a controlled room.

Frame at motor rating on variable torque. Hazardous-area certification is not part of the current dossier — see the limits below.

G500 / G600 · 0.75–900 kW

Send the duty point
Blower and compressor duty served by a Goldbell heavy-duty vector drive

Blowers and compressors · torque boost at low frequency, over-excitation braking

03 · 3 industries

Discrete manufacturing

Duties where the drive is part of a machine: the load repeats exactly, the cycle is short, and the parameter set matters as much as the frame.

Textile and printing

Line shafts, winders and high-speed spindles on a continuously running line.

Output to 600 Hz, 3,000 Hz to order; ±0.5% speed accuracy on SVC and ±0.02% on closed loop.

G600 / servo · 0.4–900 kW

Send the duty point

Packaging lines

Conveyor synchronisation, indexing and film drives on one machine cycle.

S-curve acceleration and DC braking without a resistor; torque response under 20 ms in SVC.

G500-G/P · 0.75–900 kW

How this duty is driven

Machine tools

Spindle positioning, tool changers and feed axes under a machine control.

Servo pack for positioning; RS-485 Modbus RTU with the parameter set loaded before the unit ships.

G500-G/P · ODM; servo 0.4–7.5 kW

How this duty is driven
Machine tool spindle duty served by a Goldbell drive and servo pack

Machine tools · RS-485 Modbus RTU, parameter set pre-loaded to the machine

What changes the build

Four numbers that follow the industry.

These are the published ratings that a duty profile actually turns on. Everything else — the frame, the enclosure, the parameter file — is decided from the duty point at quotation.

Protection

IP20

Standard grade; cabinet builds quoted to order.

Overload

150% / 60 s

G rating; 120% for 60 s on the P rating.

Carrier

0.5–16 kHz

Adjustable, with the cable run and noise in mind.

Warranty

12 months

Factory warranty, full replacement terms.

Limits

What this page does not claim

Three things a buyer is right to ask for are not on this page, because the plant does not publish them. Saying so is cheaper than being caught on it later.

No industry referencesNo customer name, plant name or installed-base count is published for any industry. The photographs on this page are the plant’s own.
No hazardous-area certificationThe dossier is CE LVD/EMC and ISO 9001. Neither covers explosion protection, so an ATEX or IECEx project needs a supplier who holds that certificate.
No per-industry derating tableAmbient, altitude and enclosure derating is confirmed on the drawing for the frame you buy, not read off a table by industry.
Operators on the drive assembly line in Jiangmen
Assembly · Jiangmen plant10-day dispatch

Figures you can put in a tender.

Every number below is the supplier’s published claim on the store listing, not a rounded target. Ask for the test sheet on the frame you are buying and it comes with the unit.

12,000 m²Factory floor
200,000VFDs built per year
20+Core engineers, PhD and masters led
100+People across QC, R&D and production
20,000Units per month supply ability
Inside the plant

Industry questions that come before a quotation

My industry is not on this page. Can you still quote it?

Yes. The industry name does not enter the sizing calculation. Four fields do: supply voltage, load type, motor rating and quantity. Send those and the frame is chosen from the duty, whether or not the application appears in the list above.

Why do several industries route to the same drive page?

Because the duty profile, not the industry, decides the frame. A conveyor on a packaging line and a conveyor on a mining feed are the same load type with the same loaded start, so the same page answers both. Where a duty is genuinely different — solar pumping, for instance, with MPPT tracking and dry-run protection — it has a page of its own.

Do you publish industry references, installations or case studies?

No. This site publishes no customer name, plant name or installed-base count for any industry. The photographs are the plant’s own, and the figures are the ones published on the store listing — a supplier who hands you a logo wall on request is a supplier whose references cannot be checked.

The ladder ends at 900 kW. What happens above that?

The frame ladders on the G500, G600 and G580 end at 900 kW, and the model lists printed on this site are an excerpt. Wider frames are quoted per frame rather than read off a table, so a duty above 900 kW goes to the RFQ with the motor rating and the load curve.

Can the drive go into a dusty or washdown area?

IP20 is the standard protection grade on the G500, and cabinet builds are to order. The cabinet’s own rating is confirmed on the drawing for that project rather than published as a catalogue value, because it depends on the enclosure, the cooling path and the room it stands in.

Is the drive certified for hazardous areas?

No. The current dossier is CE LVD/EMC, attested by UDEM, plus ISO 9001 held by the Shenzhen entity with the scope research and development service of industrial variable frequency controllers. Neither covers explosion protection, so a hazardous-area project needs the motor, the enclosure and that certification to come from a supplier who holds it.

What is the minimum order for one industry build?

One piece at sample price. Private label and a parameter set loaded for your duty start at 100 pieces, and the published lead time is 10 days for 1–5,000 pieces once the specification is agreed.

Frame ladder

0.4–900 kW

Wider frames quoted per frame, not off a table.

Supply

220 / 380 V

Single or three-phase input, 50 / 60 Hz.

Minimum order

1 pc

Private label and loaded parameter sets from 100 pcs.

Lead time

10 days

10 days, 1–5,000 pieces.