Machine Tools & OEM
Drives and servo systems for machine builders.
A parameter set pre-loaded to your machine leaves the factory with the drive, so the line does not depend on a commissioning engineer being on site. RS-485 Modbus RTU for the PLC, matched servo sets for the axes.

This duty at a glance
A frame number is only issued against the duty point: send the curve, the cycle or the belt data and the rating comes back confirmed, not estimated.
Platforms used for this duty
What this duty actually asks of the drive
For a machine builder the drive is a component with a delivery date, not a project. What decides the order is whether the unit arrives with the right parameter file, the right label and a test sheet that matches the serial range — because the commissioning window on a line is measured in hours, not weeks.
On the motion side the requirement changes. A spindle takes a vector drive; an axis takes a matched servo set, where drive and motor are paired at the factory so the gain and the filter settings are already tuned for that motor rather than for a family of them.
Resonance is the recurring complaint on a machine axis. The servo drive carries built-in FIR and multiple trap filters to suppress it, which is what makes a matched set faster to commission than a drive-and-motor pairing done on site.
How the frame is chosen
| Duty condition | Frame rule | What gets set |
|---|---|---|
| Spindle, constant torque | G rating, one frame up on loaded starts | S-curve ramp, DC braking set |
| Axis positioning | Matched AC servo set, 0.4–7.5 kW | FIR and trap filters set against the axis resonance |
| OEM private label | From 100 pieces | Enclosure print, packaging, parameter file and test sheet |
| PLC integration | Frame at motor rating | RS-485 Modbus RTU register map agreed |
Frame numbers are issued against the duty point, not against the motor nameplate. Send the load profile — curve, head, cycle or belt data — and the rating is confirmed on it.
Where this platform stops
A page that claims to cover every case is worth less than one that says where the catalogue ends. These are the limits that decide whether the answer is a standard frame, a cabinet build, or a different platform entirely.
Questions that come before a purchase order
What does the OEM parameter set actually include?
The parameter file is loaded and verified at the factory against the machine duty you describe, and it ships with a test sheet carrying your serial range. On the line the unit is powered, the motor is connected and the machine runs — the commissioning engineer is not re-entering motor data.
When should I use a servo set instead of a vector drive?
When the axis has to hold position or follow a commanded profile. A vector drive runs a spindle or a pump duty well; a positioning axis takes a matched servo drive and motor, where the pair is tuned at the factory and the filters are set for that motor.
What is the minimum for a private-label build?
Private label starts at 100 pieces: printed enclosure, your packaging, your parameter file and a test sheet with your serial range. Below that the standard Goldbell build ships with the published label.
Can the drive be integrated into my machine cabinet?
Yes — IP20 wall-mount frames go into the machine cabinet, and RS-485 Modbus RTU carries the control from your PLC. Where the environment needs it, IP54 cabinet builds are quoted on the G500 frames.
Other duty profiles
Next step
Send the duty point. Get a frame number back.
Power, voltage, load type and the number of units is enough to quote. Anything short of that gets a question back the same working day.
- ≤ 3 h
- Reply on a working day
- 1 pc
- Minimum order
- 10 days
- Lead time to dispatch
- CE LVD/EMC
- ISO 9001 plant
