Manufacturing plant · Jiangmen, CN
English · GlobalRequest a quoteStore

G100

Compact Micro Drive

Cost-effective micro inverter for space-constrained OEM equipment.

Ultra-compact, space-saving drive built for small fans, circulating pumps, packaging lines, and entry-level automation machinery. Supports single-phase 220 V input and features an intuitive front potentiometer knob and multi-function keys.

Ultra-small footprint fits DIN rails or tight equipment internal chassisIntuitive operator panel with precision speed control potentiometer knobDual cosmetic choices: industrial clean white or standard equipment grayHighly economical for high-volume machinery OEM buildersWired 1-phase to 1-phase or 1-phase to 3-phase, so a 220 V motor and a 380 V motor run off the same seriesOptional DC-to-AC solar variant on the same chassis for small irrigation pumps

Electrical envelope

Download this sheet as PDF

ParameterListed value
Rated power0.4–4.0 kW
Input voltageSingle-phase 220 V (±15%)
Output voltageThree-phase 220 V / Single-phase 220 V
Control modeV/F control
Power wiring1-φ to 1-φ · 1-φ to 3-φ on the same series
Frequency range0.00–400.00 Hz
Operator panelLED display with analog speed potentiometer, MODE / JOG / RUN / STOP keys
ProtectionIP20, short circuit, stall prevention
Typical applicationsFan control · Water pump drive · Light industry equipment · Agricultural equipment
MOQ1 piece

Frames and packages

ModelRatedDimensionsPackage
G100-2S0.40.4 kW142 × 85 × 113 mmIndividual export cartonRequest
G100-2S0.750.75 kW142 × 85 × 113 mmIndividual export cartonRequest
G100-2S1.51.5 kW150 × 95 × 125 mmIndividual export cartonRequest
G100-2S2.22.2 kW150 × 95 × 125 mmIndividual export cartonRequest
G100-2S4.04.0 kW170 × 110 × 140 mmIndividual export cartonRequest

Model codes and frame variants beyond this table are quoted to order. Final specification confirmed at quotation.

Where this platform is used

The frame is chosen from the load profile rather than from the nameplate. Each page below states the selection rule, the parameter that matters, and where the platform stops.

Which platform fits your duty

Six platforms overlap on paper. They do not overlap on the plant floor. The table below is the same routing the sales desk uses when a specification arrives without a model code — read your duty, then take the row that matches.

PlatformTypical dutyPick it whenLook elsewhere when
G5000.75–800 kWCrushers, conveyors, mixers, hoists and grid conditions that sag or spikeStarting torque is the constraint, or the grid is above 380 VThe build only needs a compact modular drive on 380 V with Modbus
G6000.75–800 kWPanel-builder cabinets, multi-drive line control, RS-485 Modbus networksThe panel is built in-house and the drive must sit on a Modbus RTU busThe site is above 380 V, or the load needs the G500 overload envelope
G580 / G580M4–37 kWDeep-well and surface pumping, solar pump arrays, pump and fan retrofitThe duty is a pump or fan, or the site runs on PV with a variable DC windowThe load is a crusher, hoist or extruder with heavy starting torque
G1000.4–4 kWSmall pumps, fans, conveyors and single-machine retrofits inside a panelThe motor is 4 kW or below and the panel has limited depthThree-phase 380 V duty above 4 kW, or anything needing a cabinet build
AC Servo Driver & Motor0.4–7.5 kWPositioning axes, indexing tables, packaging and CNC feed motionThe axis needs position or torque control, not just variable speedThe duty is a pump or fan where a V/F drive already does the job
A6-CUniversal inputTemperature and process loops — extrusion, ovens, dryers, heat treatThe signal to control is a process variable, not a motor shaftYou need to run a motor: this is a controller, not a drive

Do not have a model code yet? The pump and fan sizing calculator turns flow and head into a power band, then into one of these platforms.

Two duties on one line — a pump plus a conveyor, a solar array plus a grid-tied fan — usually mean two platforms in one cabinet, not one oversized drive. Send both duties in one enquiry and the two models are quoted together.

Questions that come before a purchase order

What power range does the G100 cover?

0.4–4 kW across 220 V, 1-φ in · 1-φ or 3-φ out. Frame and package variants outside the published table are quoted to the required duty.

Can the G100 be ordered in single units?

1 piece. Private-label and custom builds start at 100 pieces.

How is overload handled?

Overload is confirmed against the duty on quotation — send the load curve with the enquiry so the rating is set on the real duty, not the motor nameplate.

What certification comes with it?

CE LVD/EMC. Contracts, invoices and the ISO 9001 certificate are issued by Goldbell Electric Drives and Controls (Shenzhen) Co., Ltd.; manufacturing runs at the 12,000 m² plant in Jiangmen.

What are the commercial terms?

Lead time 10 days, 1–5,000 pieces; 12 months factory warranty. Quotation is issued against your specification — no price is published on this site.

G100 Compact Micro Drive
G100G100 micro drive · 0.4–4 kW
0.4–4 kWPower range
220 VVoltage
1-φ in · 1-φ or 3-φ outPhase
IP20 · Space-Saving EnclosureEnclosure
V/F · Compact Vector · White/Gray ShellControl
CE LVD/EMCCertificate