Manufacturing plant · Jiangmen, CN
English · GlobalRequest a quoteStore

G580 / G580M

Versatile Vector & Solar Pump Drive

Flagship multi-purpose drive with classic blue band and solar MPPT.

Goldbell’s most widely recognized exterior platform. Featuring the signature vertical blue stripe and embossed Goldbell cooling housing, G580 delivers robust torque control, wide voltage tolerance, and seamless solar pump MPPT operation for irrigation and water supply worldwide.

High MPPT tracking efficiency exceeding 95% under dynamic solar irradianceSolar DC array in, or grid AC through the optional AC/DC automatic changeover switchAutomatic dry-run, low-sunlight sleep, and water level detection logicPre-loaded motor parameters tailored to surface and submersible pumpsOne-key parameter recovery after a board swap — the pump station is back in a single keypressOver-temperature automatic frequency reduction instead of a hard trip on a hot afternoon

Electrical envelope

Download this sheet as PDF

ParameterListed value
Rated power4.0–37 kW (other frames quoted on request)
Input voltageSingle-phase 220 V / Three-phase 380 V
Output voltageThree-phase 0–380 V
Control modesV/F · Sensorless Vector Control (SVC) · Closed-loop Vector (VC) · MPPT
Motor typesStandard and multi-frequency AC asynchronous induction motors
MPPT efficiency≥ 95%
Overload150% rated current for 60 s on the G rating
ProtectionOver-voltage, over-current, over-temperature automatic frequency reduction
Operator interfaceVisual keypad, one-key parameter recovery after a board swap
Typical applicationsIrrigation and solar pumping · Pump control · Fan control · Conveying · Textile · Food and beverage
CertificationsCE LVD/EMC, ISO 9001
MOQ1 piece

Frames and packages

ModelRatedDimensionsPackage
G580M-4T4.0G4.0 kW245 × 120 × 173 mm290 × 185 × 240 mmRequest
G580M-4T7.5G7.5 kW245 × 120 × 173 mm290 × 185 × 240 mmRequest
G580M-4T15G15 kW320 × 203 × 205 mm390 × 290 × 290 mmRequest
G580M-4T22G22 kW320 × 203 × 205 mm390 × 290 × 290 mmRequest
G580M-4T37G37 kW440 × 256 × 230 mm520 × 350 × 310 mmRequest

Model codes and frame variants beyond this table are quoted to order. Final specification confirmed at quotation.

Where this platform is used

The frame is chosen from the load profile rather than from the nameplate. Each page below states the selection rule, the parameter that matters, and where the platform stops.

Which platform fits your duty

Six platforms overlap on paper. They do not overlap on the plant floor. The table below is the same routing the sales desk uses when a specification arrives without a model code — read your duty, then take the row that matches.

PlatformTypical dutyPick it whenLook elsewhere when
G5000.75–800 kWCrushers, conveyors, mixers, hoists and grid conditions that sag or spikeStarting torque is the constraint, or the grid is above 380 VThe build only needs a compact modular drive on 380 V with Modbus
G6000.75–800 kWPanel-builder cabinets, multi-drive line control, RS-485 Modbus networksThe panel is built in-house and the drive must sit on a Modbus RTU busThe site is above 380 V, or the load needs the G500 overload envelope
G580 / G580M4–37 kWDeep-well and surface pumping, solar pump arrays, pump and fan retrofitThe duty is a pump or fan, or the site runs on PV with a variable DC windowThe load is a crusher, hoist or extruder with heavy starting torque
G1000.4–4 kWSmall pumps, fans, conveyors and single-machine retrofits inside a panelThe motor is 4 kW or below and the panel has limited depthThree-phase 380 V duty above 4 kW, or anything needing a cabinet build
AC Servo Driver & Motor0.4–7.5 kWPositioning axes, indexing tables, packaging and CNC feed motionThe axis needs position or torque control, not just variable speedThe duty is a pump or fan where a V/F drive already does the job
A6-CUniversal inputTemperature and process loops — extrusion, ovens, dryers, heat treatThe signal to control is a process variable, not a motor shaftYou need to run a motor: this is a controller, not a drive

Do not have a model code yet? The pump and fan sizing calculator turns flow and head into a power band, then into one of these platforms.

Two duties on one line — a pump plus a conveyor, a solar array plus a grid-tied fan — usually mean two platforms in one cabinet, not one oversized drive. Send both duties in one enquiry and the two models are quoted together.

Questions that come before a purchase order

What power range does the G580 / G580M cover?

4–37 kW across 220 / 380 V, 1-φ or 3-φ in · 3-φ out. Frame and package variants outside the published table are quoted to the required duty.

Can the G580 / G580M be ordered in single units?

1 piece. Private-label and custom builds start at 100 pieces.

How is overload handled?

150% rated current for 60 s on the G rating. Send the load curve with the enquiry so the rating is confirmed against the real duty, not the motor nameplate.

What certification comes with it?

CE LVD/EMC · ISO 9001. Contracts, invoices and the ISO 9001 certificate are issued by Goldbell Electric Drives and Controls (Shenzhen) Co., Ltd.; manufacturing runs at the 12,000 m² plant in Jiangmen.

What are the commercial terms?

Lead time 10 days, 1–5,000 pieces; 12 months factory warranty. Quotation is issued against your specification — no price is published on this site.

G580 / G580M Versatile Vector & Solar Pump Drive
G580 / G580MG580M vector & solar drive · 4–37 kW
4–37 kWPower range
220 / 380 VVoltage
1-φ or 3-φ in · 3-φ outPhase
IP20 · Wall MountEnclosure
SVC · V/F · VC · MPPT Solar TrackingControl
CE LVD/EMC · ISO 9001Certificate