G500
Heavy-Duty Vector Drive
High-performance AC drive from 0.75 kW to 800 kW, with ratings 220 / 380 V.
The heavy-duty industrial workhorse. G500 is an AC-to-AC high-quality, low-noise, multifunctional vector control drive designed for challenging grid and load conditions. Features optimized space vector control, high-efficiency IGBT modules from established domestic suppliers, smooth low-frequency torque output, and full electronic protection.
Electrical envelope
| Parameter | Listed value |
|---|---|
| Rated power | 0.75–800 kW |
| Nominal voltage | 220 V / 380 V |
| Power phase | Three-phase output (single/three-phase input) |
| Control modes | Sensorless Vector Control (SVC), V/F, Closed-loop Vector (VC) |
| Overload capacity | 150% for 60 s (G rating); 120% for 60 s (P rating) |
| Output frequency | 0.00–600.00 Hz (customizable up to 3000 Hz) |
| Carrier frequency | 0.5–16.0 kHz, automatic adjustment by temperature |
| Speed accuracy | ±0.5% (SVC), ±0.02% (VC) |
| Torque response | < 20 ms (SVC), < 5 ms (VC) |
| Protection grade | IP20, cabinet builds to order |
| Cooling method | Forced air cooling with intelligent thermal fan control |
| Warranty | 12 months full replacement / factory warranty |
| MOQ | 1 piece (Custom OEM from 100 pieces) |
| Order code | G500 – T – 0.7 – G – B |
| Voltage grade | S = 1-φ 220 V · 2T = 3-φ 220 V · 4T = 3-φ 380 V · other grades quoted against the nameplate voltage |
| Duty type | G = heavy duty · P = light duty on the same frame |
| Brake unit | Suffix B = integrated braking unit · no suffix = none |
| Typical applications | Industrial automation · Pump control · Fan control · Conveying systems · Textile machinery · Paper and printing · Mining and metallurgy · Electric vehicle · Food and beverage processing |
Frames and packages
| Model | Rated | Dimensions | Package | |
|---|---|---|---|---|
| G500-S0.75G | 0.75 kW (1-φ 220 V) | 166 × 83 × 131 mm | 190 × 130 × 170 mm | Request |
| G500-4T5.5G / 7.5P | 5.5 / 7.5 kW (380 V) | 245 × 120 × 173 mm | 290 × 185 × 240 mm | Request |
| G500-4T15G / 18.5P | 15 / 18.5 kW (380 V) | 320 × 203 × 205 mm | 390 × 290 × 290 mm | Request |
| G500-4T45G / 55P | 45 / 55 kW (380 V) | 440 × 256 × 230 mm | 520 × 350 × 310 mm | Request |
| G500-4T110G / 132P | 110 / 132 kW (380 V) | 550 × 445 × 360 mm | Export wooden crate | Request |
| G500-4T315G / 355P | 315 / 355 kW (380 V) | 900 × 610 × 603 mm | Floor cabinet build | Request |
| G500-4T800G | 800 kW (380 V) | Cabinet modular assembly | Engineered cabinet unit | Request |
Model codes and frame variants beyond this table are quoted to order. Final specification confirmed at quotation.
How a G500 model code is built
Taken from the catalogue code rule. The two fields buyers misread most often are the voltage grade and the load type — those two decide the frame and the overload curve.
- G500
- Inverter series
- Voltage grade
- S single-phase 220 V · 2T three-phase 220 V · 4T three-phase 380 V · other grades quoted against the nameplate voltage
- Motor power
- Rated motor power in kW, e.g. 0.7 = 0.75 kW
- Type
- G heavy-duty load · P light-duty load
- Braking unit
- B brake unit fitted · blank not fitted
Where this platform is used
The frame is chosen from the load profile rather than from the nameplate. Each page below states the selection rule, the parameter that matters, and where the platform stops.
Which platform fits your duty
Six platforms overlap on paper. They do not overlap on the plant floor. The table below is the same routing the sales desk uses when a specification arrives without a model code — read your duty, then take the row that matches.
| Platform | Typical duty | Pick it when | Look elsewhere when |
|---|---|---|---|
| G5000.75–800 kW | Crushers, conveyors, mixers, hoists and grid conditions that sag or spike | Starting torque is the constraint, or the grid is above 380 V | The build only needs a compact modular drive on 380 V with Modbus |
| G6000.75–800 kW | Panel-builder cabinets, multi-drive line control, RS-485 Modbus networks | The panel is built in-house and the drive must sit on a Modbus RTU bus | The site is above 380 V, or the load needs the G500 overload envelope |
| G580 / G580M4–37 kW | Deep-well and surface pumping, solar pump arrays, pump and fan retrofit | The duty is a pump or fan, or the site runs on PV with a variable DC window | The load is a crusher, hoist or extruder with heavy starting torque |
| G1000.4–4 kW | Small pumps, fans, conveyors and single-machine retrofits inside a panel | The motor is 4 kW or below and the panel has limited depth | Three-phase 380 V duty above 4 kW, or anything needing a cabinet build |
| AC Servo Driver & Motor0.4–7.5 kW | Positioning axes, indexing tables, packaging and CNC feed motion | The axis needs position or torque control, not just variable speed | The duty is a pump or fan where a V/F drive already does the job |
| A6-CUniversal input | Temperature and process loops — extrusion, ovens, dryers, heat treat | The signal to control is a process variable, not a motor shaft | You need to run a motor: this is a controller, not a drive |
Do not have a model code yet? The pump and fan sizing calculator turns flow and head into a power band, then into one of these platforms.
Two duties on one line — a pump plus a conveyor, a solar array plus a grid-tied fan — usually mean two platforms in one cabinet, not one oversized drive. Send both duties in one enquiry and the two models are quoted together.
Questions that come before a purchase order
What power range does the G500 cover?
0.75–800 kW across 220 / 380 V, 1-φ or 3-φ in · 3-φ out. Frame and package variants outside the published table are quoted to the required duty.
Can the G500 be ordered in single units?
1 piece (Custom OEM from 100 pieces). Private-label and custom builds start at 100 pieces.
How is overload handled?
150% for 60 s (G rating); 120% for 60 s (P rating). Send the load curve with the enquiry so the rating is confirmed against the real duty, not the motor nameplate.
What certification comes with it?
CE LVD/EMC · ISO 9001. Contracts, invoices and the ISO 9001 certificate are issued by Goldbell Electric Drives and Controls (Shenzhen) Co., Ltd.; manufacturing runs at the 12,000 m² plant in Jiangmen.
What are the commercial terms?
Lead time 10 days, 1–5,000 pieces; 12 months full replacement / factory warranty. Quotation is issued against your specification — no price is published on this site.
