Manufacturing plant · Jiangmen, CN
English · GlobalRequest a quoteStore

OEM · ODM · OBM partner programme · Three product lines · Manufacturing since 2013

Three product lines. One nameplate: yours.

Variable frequency drives, temperature controllers and film width measurement controllers — built in one plant in Jiangmen, and all three able to carry your name. Private label from 100 pieces, your faceplate and parameter set loaded before the carton is sealed, CE and ISO 9001 documents for your vendor onboarding, across 12,000 m² of manufacturing.

100 pcsPrivate-label minimum
12,000 m²Plant · 20+ engineers
10 daysFirst article dispatch
CE · ISO 9001Dossier for onboarding

OEM / ODM partner programme

What a partner actually gets.

Six things, stated the way they are contracted: the brand layer, the firmware layer, the compliance dossier, the commercial terms, the engineering support and the after-sales route. Private label is only the first of them.

01Brand

Your nameplate. No factory mark.

The unit leaves the plant as your product: your enclosure print, your model code, your manual, your carton. Nothing on the housing points back to us.

Neutral packaging
Zero factory branding
Enclosure print
Your artwork, your colour
Nameplate
Your model code and serial range
Manuals
Your language, your layout
  • Private label from 100 pcs
  • MOQ 1 for evaluation units
02Firmware

Your parameter file ships loaded.

We can pre-load one default set or several motor groups, so the unit arrives commissioned to your specification instead of to ours.

Default set
Your values, locked at factory
Duty macros
MPPT · pressure PID · brake logic
Parameter recovery
One-key restore after a board swap
Keypad language
English · Russian · Spanish · Arabic
  • Modbus RTU standard
  • EtherCAT / PROFINET / CANopen on request
03Compliance

A dossier your customer will accept.

The paperwork that decides whether a brand owner can list the product: CE attestation, quality certificate, and a unit test sheet tied to the serial you shipped.

CE LVD/EMC
UDEM attestation of conformity
ISO 9001
STC 78623Q0124R0S, GB/T 19001-2016
Test sheet
Per unit, against your serial range
Vendor onboarding
Licence and certificate copies on request
  • Serial-to-carton mapping kept for warranty traceability
04Commercial

Terms written down, before drawings.

Territory, model exclusivity and annual pricing are agreed in the partner agreement. They are commercial terms, so they are quoted to you — not printed on a web page.

Territory
Exclusivity for qualified partners
Model exclusivity
Reserved SKU on your frame
Annual pricing
Fixed for the agreed volume band
NDA
Signed before any drawing is shared
  • VMI and split delivery for repeat programmes
05Engineering

An engineer, not a mailbox.

Twenty-plus engineers behind the account, and a technical reply inside three hours on a working day. Sizing, derating and cabinet layout come with the quote.

20+ engineers
In-house R&D, Shenzhen
3 h
Reply on a technical question
Sizing help
Frame and derating per duty cycle
Sample programme
Evaluation unit before the volume order
  • Joint development under NDA
  • Conformal coating and EMC filter options
06After-sales

Service routes through you, not around you.

End-customer contact stays with the partner. Replacement boards, parameter recovery and failure analysis come back through your account so your margin and your relationship survive the first fault.

12 months
Factory warranty
Board swap
One-key parameter recovery
Serial mapping
Carton to serial, kept for traceability
Service route
End-customer contact stays with you

    The clause structure is published — the twenty-one rows of the partner terms sheet. Discount bands, exclusivity thresholds and stock commitments are agreed in writing against your volume and territory, so they are quoted rather than printed.

    OEM / ODM capability

    What customisation actually covers.

    Private label is the visible end of it. Underneath are three layers that decide whether the unit works on your customer's site — and whether it can be sold as your product without a factory mark anywhere on it.

    01Electrical engineering

    Built for your grid, not ours.

    The power stage is re-rated against the supply you actually meter, so a 440 V site does not get a 380 V unit with a warning label.

    220 / 380 V
    Input range, 1-φ or 3-φ
    0–3000 Hz
    Output frequency
    150% / 60 s
    Overload capacity
    0.5–20 kHz
    Adjustable carrier
    • Built-in braking unit
    • DC / AC reactor options
    • EMC filter, internal or external
    • Conformal coating for humidity
    02Firmware & application intelligence

    The macro is already written.

    Six duty types ship as pre-built parameter sets — MPPT, pressure PID, sleep/wake, brake logic — so commissioning is a selection, not a project.

    Solar pump
    MPPT · dry-run · water level
    Fan & blower
    Pressure PID · sleep/wake
    Air compressor
    Multi-speed · temp PID
    Water supply
    Constant pressure · anti-freeze
    Crane & hoist
    Brake logic · low-speed torque
    Spindle CNC
    Oriented stop · rigid tapping
    • Modbus RTU standard
    • EtherCAT / PROFINET / CANopen on request
    • Multi-language UI
    03Partnership beyond product

    Your identity, protected end to end.

    From neutral cartons to territory, the commercial layer is negotiated as deliberately as the electronics.

    Neutral packaging
    Zero factory branding
    VMI & split delivery
    Vendor-managed stock
    Component selection
    Infineon IGBT, NCC capacitors
    Joint R&D & IP
    NDA guaranteed
    • Exclusive territory for qualified partners
    • After-sales routed through you
    • MOQ 1 for samples, 100 pcs for private label

    Send a competitor unit and your specification — the engineering reply states what changes, what it costs, and what the minimum batch is.

    Start an OEM enquiry
    Solar pumping

    The pump keeps running when the cloud arrives.

    The MPPT stage tracks across the array’s DC window instead of sitting at a fixed voltage, so output follows the sun through haze rather than tripping off at the first dip. Below the start threshold the drive holds and waits instead of hunting.

    0.4–900 kWG580MPV-G range
    220 / 380 VSingle or three-phase in
    ≥ 95%MPPT conversion
    G580 / G580M specification
    Solar pump system diagram: PV array and AC input into a G600 MPPT drive, driving a submersible pump to an overhead tank
    Irradiance

    Drag to see how a G580MPV-G on a 7.5 kW pump set responds as the array comes up and the light falls away.

    Array

    820W/m²

    Output

    37.5Hz

    Flow

    24.0m³/h

    03006009001200 W/m²

    Run state · 37.5 Hz, 24.0 m³/h at this irradiance.

    Three answers, then a model code.

    Supply, load type and motor rating are what a quotation actually needs. Pick them here and the selector returns the platform and a frame dimension, with the option to send the whole selection straight into an inquiry.

    SupplyWhat is on the wall
    LoadWhat the motor turns
    PowerMotor nameplate
    Recommended platform

    G580MPV-G

    Solar Pump Drive, 380 V input

    Range

    11–37 kW

    Supply

    3-φ 380 V

    Frame

    320 × 203 × 205 mm (G580 / G500 / G600)

    MPPT tracking with dry-run and low-voltage protection.

    Supply
    Load
    Motor rating

    For loads above 900 kW, or where the motor nameplate is missing, send the duty point and it will be sized against the current frame list.

    Why Goldbell: VFD source factory since 2013, 60+ countries, 1,000,000+ units shipped to date, MOQ 1

    Why Goldbell — a source factory, not a trading desk

    Since 2013 · 60+ export countries · 1,000,000+ units shipped to date · MOQ 1

    See the evidence
    Operators on the drive assembly line in Jiangmen
    Assembly · Jiangmen plant10-day dispatch

    Figures you can put in a tender.

    Every number below is the supplier’s published claim on the store listing, not a rounded target. Ask for the test sheet on the frame you are buying and it comes with the unit.

    12,000 m²Factory floor
    200,000VFDs built per year
    20+Core engineers, PhD and masters led
    100+People across QC, R&D and production
    20,000Units per month supply ability
    Inside the plant
    Goldbell manufacturing plant in Xinhui, Jiangmen — production building with the Goldbell and Jinzhong signs on the facade

    Plant

    Jiangmen, CN

    Floor area

    12,000 m²

    Workshop standard

    6S

    Inside the plant

    Inside the drive

    The parts that decide the service life.

    Neither plate is a render. The left one is the teardown we send to buyers who ask what the bill of materials actually is; the right one is the panel as it is shipped, with the parameter set already loaded.

    Annotated teardown of the G580M: Infineon IGBT module, cooling fan, RS485 terminal, removable keypad, 32-bit DSP board

    Power stage and control board

    Infineon / STARPOWER IGBT, 32-bit DSP, built-in RS485 card and a keypad with selectable English, Russian, Spanish or Arabic menus.

    G500 with the terminal cover open, showing the parameter display plate: 220/380 V input, 0-600 Hz output, 0.75-75 kW

    Terminals, as the series plate prints them

    R S T in, U V W out, P+ / PB for a braking resistor. The plate on the cover repeats the range so a replacement unit is ordered correctly on site.

    Applications

    Six duty types the range is quoted against.

    The frame choice rarely turns on power alone — it turns on whether the load is variable or constant torque, and whether anything has to talk to a PLC afterwards.

    Installed, not rendered.

    Photographs from commissioned sites and from the build line. No stock imagery, no composite scenes — these are the units the store has shipped.

    Solar deep-well pumping station · 11 kW G580MPV drive
    Solar deep-well pumping station · 11 kW G580MPV drive
    Surface water distribution cabinet · G500 vector drive
    Surface water distribution cabinet · G500 vector drive
    Agricultural estate booster pump · dual G580M drives
    Agricultural estate booster pump · dual G580M drives
    PV array combiner box feeding G580MPV DC bus
    PV array combiner box feeding G580MPV DC bus
    Stocked G500 and G600 drives on racking, labelled by frame and voltage, ready for same-day dispatch

    Ready stock — the frames that ship the same day

    G500 · G600 stocked at 220 V and 380 V, 0.75–75 kW

    Check stock on your frame
    Boxed Goldbell drives on the warehouse floor, staged for private-label dispatch

    How a partnership starts

    Sample first. Then your SKU.

    One unit to evaluate on your own bench, then a first article under your print, then the volume run. Each step is priced and dated before it begins, and the same account manager moves with it.

    Start with a sample
    1 pc
    Evaluation sample
    100 pcs
    Private-label first article
    10 days
    Lead time, 1–5,000 pcs

    Buyer verification

    What buyers wrote after the audit.

    4.9from 90 reviews on the Alibaba storefront
    Now I feel that I have finally found the right supplier. Goldbell is definitely a trustworthy partner for long-term cooperation.
    Verified buyerUnited StatesAugust 2025
    After that, I placed my first order. When the goods arrived, the quality was excellent and the inverters performed exactly as expected. Throughout the process, Andy was very professional, responsive, and supportive.
    Verified buyerUnited StatesAugust 2025
    The factory visit gave me a lot of confidence — the facilities were modern, the production process was well organized, and the quality control was very strict.
    Verified buyerUnited StatesAugust 2025

    Reviews are transcribed from goldbellvfd.en.alibaba.com and are not edited. Names are withheld by the platform.

    Six published buyer reviews of Goldbell drives from Finland, Spain, Saudi Arabia and other markets

    Reviews as they are published on the Alibaba.com storefront

    Excerpts shown in the buyers' own languages · full ratings under each listing

    Ask for reference sites

    Next step

    Send the duty point. Get a frame number back.

    Power, voltage, load type and the number of units is enough to quote. Anything short of that gets a question back the same working day.

    ≤ 3 h
    Reply on a working day
    1 pc
    Minimum order
    10 days
    Lead time to dispatch
    CE LVD/EMC
    ISO 9001 plant