G600
Modular High-Performance Vector Drive
Compact modular AC drive with RS-485 Modbus, ratings 0.75 kW to 800 kW.
Upgraded modular vector platform. G600 features an ultra-reliable compact integrated power module, dual-keypad interface, integrated RS-485 Modbus communication, and high cost-effectiveness across general industrial machinery, compressors, and pump sets.
Electrical envelope
| Parameter | Listed value |
|---|---|
| Rated power | 0.75–800 kW |
| Nominal voltage | 220 V / 380 V |
| Control modes | Sensorless Vector (SVC), V/F control |
| Starting torque | 0.5 Hz / 150% (SVC) |
| Communication | RS-485 Modbus RTU standard, one host to several drives |
| MPPT control | Advanced MPPT, optional solar pump firmware |
| Protection | Overcurrent, overvoltage, undervoltage, motor overload, phase loss |
| Operating temp | −10 °C to +50 °C |
| Installation | Wall mount, slide-in or cabinet mount |
| Typical applications | Industrial automation · Pump control · Fan control · Conveying systems · Textile machinery · Paper and printing · Mining and metallurgy · Electric vehicle · Food and beverage processing |
| Warranty | 12 months factory warranty |
| MOQ | 1 piece |
Frames and packages
| Model | Rated | Dimensions | Package | |
|---|---|---|---|---|
| G600-4T0.75G | 0.75 kW | Compact modular frame A | Carton | Request |
| G600-4T7.5G | 7.5 kW | Compact modular frame B | Carton | Request |
| G600-4T37G | 37 kW | Compact modular frame C | Carton | Request |
| G600-4T160G | 160 kW | Floor-standing frame D | Crate | Request |
Model codes and frame variants beyond this table are quoted to order. Final specification confirmed at quotation.
Where this platform is used
The frame is chosen from the load profile rather than from the nameplate. Each page below states the selection rule, the parameter that matters, and where the platform stops.
Which platform fits your duty
Six platforms overlap on paper. They do not overlap on the plant floor. The table below is the same routing the sales desk uses when a specification arrives without a model code — read your duty, then take the row that matches.
| Platform | Typical duty | Pick it when | Look elsewhere when |
|---|---|---|---|
| G5000.75–800 kW | Crushers, conveyors, mixers, hoists and grid conditions that sag or spike | Starting torque is the constraint, or the grid is above 380 V | The build only needs a compact modular drive on 380 V with Modbus |
| G6000.75–800 kW | Panel-builder cabinets, multi-drive line control, RS-485 Modbus networks | The panel is built in-house and the drive must sit on a Modbus RTU bus | The site is above 380 V, or the load needs the G500 overload envelope |
| G580 / G580M4–37 kW | Deep-well and surface pumping, solar pump arrays, pump and fan retrofit | The duty is a pump or fan, or the site runs on PV with a variable DC window | The load is a crusher, hoist or extruder with heavy starting torque |
| G1000.4–4 kW | Small pumps, fans, conveyors and single-machine retrofits inside a panel | The motor is 4 kW or below and the panel has limited depth | Three-phase 380 V duty above 4 kW, or anything needing a cabinet build |
| AC Servo Driver & Motor0.4–7.5 kW | Positioning axes, indexing tables, packaging and CNC feed motion | The axis needs position or torque control, not just variable speed | The duty is a pump or fan where a V/F drive already does the job |
| A6-CUniversal input | Temperature and process loops — extrusion, ovens, dryers, heat treat | The signal to control is a process variable, not a motor shaft | You need to run a motor: this is a controller, not a drive |
Do not have a model code yet? The pump and fan sizing calculator turns flow and head into a power band, then into one of these platforms.
Two duties on one line — a pump plus a conveyor, a solar array plus a grid-tied fan — usually mean two platforms in one cabinet, not one oversized drive. Send both duties in one enquiry and the two models are quoted together.
Questions that come before a purchase order
What power range does the G600 cover?
0.75–800 kW across 220 / 380 V, 3-φ in · 3-φ out. Frame and package variants outside the published table are quoted to the required duty.
Can the G600 be ordered in single units?
1 piece. Private-label and custom builds start at 100 pieces.
How is overload handled?
Overload is confirmed against the duty on quotation — send the load curve with the enquiry so the rating is set on the real duty, not the motor nameplate.
What certification comes with it?
CE LVD/EMC · ISO 9001. Contracts, invoices and the ISO 9001 certificate are issued by Goldbell Electric Drives and Controls (Shenzhen) Co., Ltd.; manufacturing runs at the 12,000 m² plant in Jiangmen.
What are the commercial terms?
Lead time 10 days, 1–5,000 pieces; 12 months factory warranty. Quotation is issued against your specification — no price is published on this site.
