AC Servo Driver & Motor
High-Precision Servo System
Low vibration, high-speed response with 3x overload for CNC & robotics.
Engineered for dynamic positioning and synchronized motion control. Features built-in digital FIR filtering to suppress mechanical resonance, 300% instantaneous overload capability, constant torque response up to 99%, and intelligent thermal fan cooling.
Electrical envelope
| Parameter | Listed value |
|---|---|
| Rated power | 0.4 kW to 7.5 kW |
| Rated speed | 1000 / 1500 / 2000 / 3000 RPM |
| Encoder type | 2500 PPR incremental / 17-bit / 23-bit absolute |
| Overload capability | Up to 300% peak rated torque |
| Control modes | Position control, Speed control, Torque control |
| Communication | RS-485 Modbus RTU, pulse/direction interface |
| Resonance control | Built-in FIR filter and multiple trap filters, auto vibration suppression |
| Motor protection | IP65 waterproof and dustproof shaft seal |
| Typical applications | Robotics · CNC positioning · Machine tools · Packaging machinery |
| MOQ | 1 set |
Servo power steps, rated speeds and encoder resolution above are the values the factory quotes on an RFQ. They are not published on the Alibaba catalogue, so confirm the exact motor frame and encoder option against your motion profile before design-in.
Frames and packages
| Model | Rated | Dimensions | Package | |
|---|---|---|---|---|
| GS-060-0.4KW | 0.4 kW / 1.27 N·m / 3000 RPM | Frame 60 | Driver + Motor + Cables | Request |
| GS-080-0.75KW | 0.75 kW / 2.39 N·m / 3000 RPM | Frame 80 | Driver + Motor + Cables | Request |
| GS-130-1.5KW | 1.5 kW / 6.0 N·m / 2000 RPM | Frame 130 | Driver + Motor + Cables | Request |
| GS-130-3.8KW | 3.8 kW / 15.0 N·m / 2000 RPM | Frame 130 | Driver + Motor + Cables | Request |
Model codes and frame variants beyond this table are quoted to order. Final specification confirmed at quotation.
Where this platform is used
The frame is chosen from the load profile rather than from the nameplate. Each page below states the selection rule, the parameter that matters, and where the platform stops.
Which platform fits your duty
Six platforms overlap on paper. They do not overlap on the plant floor. The table below is the same routing the sales desk uses when a specification arrives without a model code — read your duty, then take the row that matches.
| Platform | Typical duty | Pick it when | Look elsewhere when |
|---|---|---|---|
| G5000.75–800 kW | Crushers, conveyors, mixers, hoists and grid conditions that sag or spike | Starting torque is the constraint, or the grid is above 380 V | The build only needs a compact modular drive on 380 V with Modbus |
| G6000.75–800 kW | Panel-builder cabinets, multi-drive line control, RS-485 Modbus networks | The panel is built in-house and the drive must sit on a Modbus RTU bus | The site is above 380 V, or the load needs the G500 overload envelope |
| G580 / G580M4–37 kW | Deep-well and surface pumping, solar pump arrays, pump and fan retrofit | The duty is a pump or fan, or the site runs on PV with a variable DC window | The load is a crusher, hoist or extruder with heavy starting torque |
| G1000.4–4 kW | Small pumps, fans, conveyors and single-machine retrofits inside a panel | The motor is 4 kW or below and the panel has limited depth | Three-phase 380 V duty above 4 kW, or anything needing a cabinet build |
| AC Servo Driver & Motor0.4–7.5 kW | Positioning axes, indexing tables, packaging and CNC feed motion | The axis needs position or torque control, not just variable speed | The duty is a pump or fan where a V/F drive already does the job |
| A6-CUniversal input | Temperature and process loops — extrusion, ovens, dryers, heat treat | The signal to control is a process variable, not a motor shaft | You need to run a motor: this is a controller, not a drive |
Do not have a model code yet? The pump and fan sizing calculator turns flow and head into a power band, then into one of these platforms.
Two duties on one line — a pump plus a conveyor, a solar array plus a grid-tied fan — usually mean two platforms in one cabinet, not one oversized drive. Send both duties in one enquiry and the two models are quoted together.
Questions that come before a purchase order
What power range does the AC Servo Driver & Motor cover?
0.4–7.5 kW across 220 / 380 V, 3-φ ac servo. Frame and package variants outside the published table are quoted to the required duty.
Can the AC Servo Driver & Motor be ordered in single units?
1 set. Private-label and custom builds start at 100 pieces.
How is overload handled?
Up to 300% peak rated torque. Send the load curve with the enquiry so the rating is confirmed against the real duty, not the motor nameplate.
What certification comes with it?
CE LVD/EMC. Contracts, invoices and the ISO 9001 certificate are issued by Goldbell Electric Drives and Controls (Shenzhen) Co., Ltd.; manufacturing runs at the 12,000 m² plant in Jiangmen.
What are the commercial terms?
Lead time 10 days, 1–5,000 pieces; 12 months factory warranty. Quotation is issued against your specification — no price is published on this site.
