A6-C
Intelligent PID Process Controller
Dual-display PID controller with a 48 × 48 mm panel cut-out.
High-precision universal-input process controller with dual four-digit 7-segment LED display, self-tuning PID algorithm, relay/SSR/4-20mA output, and RS-485 Modbus communication.
Electrical envelope
| Parameter | Listed value |
|---|---|
| Input signal | TC (K, J, E, T, S) · RTD (Pt100, Cu50) · 0–10 V · 4–20 mA |
| Display | Dual 4-digit 7-segment LED (green PV, red SV) |
| Sampling period | 100 ms |
| Control outputs | Relay contact · SSR voltage pulse · 4–20 mA current |
| Power supply | 85–265 V AC, 50/60 Hz |
| Mounting | Standard 48 × 48 mm panel cutout (1/16 DIN) |
| Protection | IP65 front bezel with silicone gasket |
| MOQ | 1 piece |
The A6-C series is offered from the factory rather than listed as a catalogue line, so the input types, sampling period, cut-out and supply range above are confirmed at quotation. Send your sensor type and panel depth and the factory will return the matching variant datasheet.
Frames and packages
| Model | Rated | Dimensions | Package | |
|---|---|---|---|---|
| A6-C-R | Relay output | 48 × 48 × 85 mm | Single box | Request |
| A6-C-S | SSR voltage pulse | 48 × 48 × 85 mm | Single box | Request |
| A6-C-I | 4–20 mA linear | 48 × 48 × 85 mm | Single box | Request |
Model codes and frame variants beyond this table are quoted to order. Final specification confirmed at quotation.
Which platform fits your duty
Six platforms overlap on paper. They do not overlap on the plant floor. The table below is the same routing the sales desk uses when a specification arrives without a model code — read your duty, then take the row that matches.
| Platform | Typical duty | Pick it when | Look elsewhere when |
|---|---|---|---|
| G5000.75–800 kW | Crushers, conveyors, mixers, hoists and grid conditions that sag or spike | Starting torque is the constraint, or the grid is above 380 V | The build only needs a compact modular drive on 380 V with Modbus |
| G6000.75–800 kW | Panel-builder cabinets, multi-drive line control, RS-485 Modbus networks | The panel is built in-house and the drive must sit on a Modbus RTU bus | The site is above 380 V, or the load needs the G500 overload envelope |
| G580 / G580M4–37 kW | Deep-well and surface pumping, solar pump arrays, pump and fan retrofit | The duty is a pump or fan, or the site runs on PV with a variable DC window | The load is a crusher, hoist or extruder with heavy starting torque |
| G1000.4–4 kW | Small pumps, fans, conveyors and single-machine retrofits inside a panel | The motor is 4 kW or below and the panel has limited depth | Three-phase 380 V duty above 4 kW, or anything needing a cabinet build |
| AC Servo Driver & Motor0.4–7.5 kW | Positioning axes, indexing tables, packaging and CNC feed motion | The axis needs position or torque control, not just variable speed | The duty is a pump or fan where a V/F drive already does the job |
| A6-CUniversal input | Temperature and process loops — extrusion, ovens, dryers, heat treat | The signal to control is a process variable, not a motor shaft | You need to run a motor: this is a controller, not a drive |
Do not have a model code yet? The pump and fan sizing calculator turns flow and head into a power band, then into one of these platforms.
Two duties on one line — a pump plus a conveyor, a solar array plus a grid-tied fan — usually mean two platforms in one cabinet, not one oversized drive. Send both duties in one enquiry and the two models are quoted together.
Questions that come before a purchase order
What power range does the A6-C cover?
Universal input across 85–265 V AC, 1-φ. Frame and package variants outside the published table are quoted to the required duty.
Can the A6-C be ordered in single units?
1 piece. Private-label and custom builds start at 100 pieces.
What certification comes with it?
CE LVD/EMC. Contracts, invoices and the ISO 9001 certificate are issued by Goldbell Electric Drives and Controls (Shenzhen) Co., Ltd.; manufacturing runs at the 12,000 m² plant in Jiangmen.
What are the commercial terms?
Lead time 10 days, 1–5,000 pieces; 12 months factory warranty. Quotation is issued against your specification — no price is published on this site.
